As far as I’m aware, what you cited only proves that there is no ether that acts on light in a way such that the round trip time in the direction of ether travel is different from the round trip time in the direction perpendicular to ether travel.

It’s not merely that:

somehow the movement of this medium caused the speed of light in one direction to be faster than another due to the movement of this medium, measuring the speed in two directions perpendicular to each other would reveal that difference.

Instead, it’s that the speed of light must be different in the two directions in a way such that their round trip times don’t average out to the same average as in the other direction.

The theories of ether at the time predicted such a round trip difference because of the wind like interactions that you say.

I believe that this in no way proves anything about the one way speed of light. The Michaelson Morley inteferometer only measures difference in round trip time.

(Insert comment about the irony of your last statement). See https://en.m.wikipedia.org/wiki/One-way_speed_of_light

I rum Creo under wine, and while the performance is great, the stability is not. Creo loves crashing even on windows, and it’s much worse on Wine. It’s the one program that I kinda wish I had kept dual boot around for.

They said “all paths on a maps suggested route”

There are a great variety of co-ops. If you define renting narrowly enough, then they are of course different. But the point is that for some (and the co-ops I’ve seen personally) you don’t have to make a down payment for a mortgage like you do with a condo or house. You instead pay a monthly fee that covers the co-op’s mortgage/repairs/taxes. Or if the place is fully owned by the co-op, then just the repairs/taxes.

But you retain the flexibility of renting in that you can leave reasonably easily since you’re not personally responsible for the mortgage.

I think there are also co-ops (possibly more commonly) where it’s essentially just a condo where the building is collectively owned by the tenants instead of a for profit company. In that case, it’s much less like renting.

The other option is a housing coop. Where you still rent, but it’s owned by all the renters collectively.

We were in Altmar, so kinda close.

I think upstate is forecast to be one of the clearer places

This is one reason I’m switching away from pla+ back to normal pla. The esun pla+ really seems to get brittle when held under stress. This is an issue with printed parts as well. I’ve had parts suddenly crack in half where they were stressed over a few months.

Also it’s really annoying when little bits of filament get stuck in your filament guide tube :(

There’s definitely software that uses parts of the windows API that games don’t touch. And doesn’t work properly on Wine. I keep a windows install around just for using an analysis software for some lab equipment that refuses to start in wine.

Things like CAD software are also a struggle, though the latest wine seems to have resolved a number of graphics issues with getting PTC Creo to properly use the nvapi and nvidia graphics drivers through wine.

While wine is amazing, plenty of things don’t work with it. Usually you don’t need them, but if you do, you do

The symptoms you describe are exactly what happens to my machine when it runs out of memory and then starts swapping really hard. This is easy to check by seeing if disk io also spikes when it happens, and if memory usage is high

I use a pixel 2 XL, but I run lineageos 21, based on android 14. I also had the feature in lineageos 20 based on android 13.

It’s possible this is a lineageos specific feature. A quick google seems to imply that this is likely so. Unfortunate :/

Mine has a setting to not send more than one notification within X minutes I under settings > notifications > app notifications > some app > minimum time between notification sounds

I think its:

Church

Don’t you dare to forget your lord god

Pillar & Ground of the truth

Edit: 1 TIM 3:15 is

https://www.biblegateway.com/verse/en/1 Timothy 3%3A15

but if I tarry long, that thou mayest know how thou ought to behave thyself in the house of God, which is the church of the living God, the pillar and ground of the truth.

More Edit: and Deuteronomy 6:12 is about not forgetting your lord

Is the bad side of the seam where it stops or where it starts printing the outer wall? I assume it’s where it stops and then it cross the wall to form the infill?

To add to the PA questions, are you sure that your PA setting actually are changing anything?

What printer is this and what firmware?

Does a spiral mode print work fine?

What if you print the part significantly slower (to rule out rigidity/acceleration issues)

Well I either got a personal fire or I’m on fire myself. Witch fire sounds better

On linux and Mac there’s also https://vorta.borgbase.com/ which is pretty good

Your filter rule association is set to ‘rule’. What is that associated rule, and do things work if you change it to ‘pass’?

https://www.reddit.com/r/opnsense/comments/puty62/correct_option_for_filter_rule_association_when/

Instead of connecting with a web browser, can you try using curl or telnet just to check if you’re getting through at the TCP/IP connection level?

I thought I saw that Mac has the same CUPS print service/printer manager that Linux uses? In fact it seems like apple developed it. I think that helps enormously with standardizing printer configs. https://www.cups.org/doc/admin.html

I was assuming this was the government ordering the companies to. They have no incentive to do so on their own. But I believe there was a bill (which thankfully didn’t pass) that would have given the president the power to essentially order the internet turned off.