Around $50 depending on options!

  • DefeaterofDarkness@lemmy.worldOP
    link
    fedilink
    arrow-up
    4
    ·
    1 year ago

    Skilhunt has one of the least complex UI’s around. Press for on, hold to cycle modes, double press for turbo. Not sure if too many share you opinion of it being “complex”.

    Not sure what “lumenitis” is, but most people are excited for the H150 because of the Nichia 519a in 4500k, Skilhunt build quality, and excellent drivers with flat regulation.

      • jerv@lemmy.world
        link
        fedilink
        English
        arrow-up
        2
        ·
        1 year ago

        I’d gladly trade the simple UI for a DWIM UI. If there were a blatant sign that I crossed the line between " thermally unsustainable" and “I can do this until I am about to swan-dive into LVP territory” then sure. As it stands, I think slightly better mode spacing is required.

        That said, I think Skilhunt gets it less-wrong that the fanatically-worshipped Zebra UI. At least Skilhunt/ESKTE/Skeet puts their thermally-unsustainable modes in Turbo by default.

        • solrize@lemmy.world
          link
          fedilink
          English
          arrow-up
          2
          ·
          1 year ago

          Idk about current zebtalight ui’s but my H50 has simple L-M-H 3 level UI that is fine. I like the DWIM idea, that gradually tapers brightness for very long runtime as the battery depletes.

          I’m on mobile rn, will reply to your other post later.

          • jerv@lemmy.world
            link
            fedilink
            English
            arrow-up
            2
            ·
            1 year ago

            For me, DWIM means “bidirectional ramping mode” since I have yet to find a stepped-mode UI that has the spacing to get me the amount of like I need in a wide variety of situations, and few that allow me to dim a light without cycling through the higher modes first or power-cycling the light. Zebra’s G5 is actually the furthest from DWIM since it has only 3 steps each with 2 sub-levels, and I never know what combination of presses and holds I need to get something that is closest to what I want/need. And G6/G7 are hard to program to choose up to 6 out of the 12 possible (often no-optimal) levels.

            Part of why I fell down the rabbit hole is that I found that flashlights can do so much more than LMH. And it’s easier to set Anduril to a 3-level stepped-mode operation than to get most non-Anduril lights to DWIM status.

            • solrize@lemmy.world
              link
              fedilink
              English
              arrow-up
              2
              ·
              edit-2
              1 year ago

              Hmm, ok, I tend to follow McGizmo’s view that levels should be spaced 10x apart, so LMH=1,10,100 lumens suits me fine. But Anduril is almost a “software-defined flashlight”, so if you prefer ramping then you also came to the right place.

              I’m unfamiliar with the Zebralight G5 but I get the vibe that Zebralight had made poor decisions lately, so it fits. I try to refuse to buy non-Anduril microprocessor lights except the simplest ones. I’m not always successful at that, but I do try.

    • jerv@lemmy.world
      link
      fedilink
      arrow-up
      1
      ·
      1 year ago

      Press for on, hold to cycle modes, double press for turbo.

      A lot of lights have that UI. Anduril merely adds a few optional options to that. Many UI’s that people regard as “simpler” than Anduril are pretty much just Anduril Simple UI with 10H removed.

      It never ceases to amaze me how many people fail to realize that.

      • DefeaterofDarkness@lemmy.worldOP
        link
        fedilink
        arrow-up
        1
        ·
        1 year ago

        I have several Andruil lights that I really like. The problem for me is that I frequently need the internet to remember how many clicks or holds from ON or OFF are needed to get it to do something I want or need. Andruil is great but the complication (outside of simple mode) just isn’t always desirable. The other downside to most Andruil lights is that they commonly use FET or direct drive. For folks who prioritize flat regulation, it makes most of them less desirable.

        Anyway, there’s a place in my collection for all kinds of UI’s. That’s part of the fun.