The first commercial PV solar product was nah just in 1909.

See story above, and original article in Modern Electrics magazine in 1909:

https://babel.hathitrust.org/cgi/pt?id=mdp.39015051407073

EDIT

Since people didn’t read past the headline, the article is about a startup company in 1905 that developed a commercial electrical solar panel by 1909 and was worth 160 million in today’s money.

In 1909, the inventor of the solar panel was kidnapped and ordered by his kidnappers to destroy all information about this solar panel. He was eventually released, although he did not destroy the solar panel or his documentation, he did shut down his company.

So this is a pretty fascinating development considering that at this time period we actually did have early production electric cars that were manufactured in larger quantities than gas vehicles, and now we learn that solar panels were commercially available, at least for a short time.


And the solar panels could generate a fair amount of electricity:

500 volts per 10 square ft, and a smaller demonstration panel that was 3 ft x 4 ft could generate 60 watts of power (10 volts @6 amps).

Additionally, the panels were designed to charge a battery backup system.

  • HappycamperNZ@lemmy.world
    link
    fedilink
    English
    arrow-up
    10
    ·
    9 months ago

    No such thing as too curious… unless you are a cat. Little dangerous there.

    If im reading this correctly, and translated to english:

    • non conductive block

    • two different alloys - zinc and opposite to zinc (antinomy) v copper and nickle/copper/zinc.

    • assuming light hits, produces difference between metal and opposite metal, results in current flow through wire to equalize. Not sure how rare earth Nickle and zinc are, but suppose its not cobalt.

        • CookieOfFortune@lemmy.world
          link
          fedilink
          English
          arrow-up
          6
          ·
          9 months ago

          Basically when there’s a temperature difference been two different metals that are touching a small current is produced. You can also go backwards and use electricity to create a temperature difference (Peltier Effect).

          They have niche applications because the effect is pretty small. Hardly a realistic substitute for solar panels that use the photovoltaic effect.

          • HappycamperNZ@lemmy.world
            link
            fedilink
            English
            arrow-up
            1
            ·
            9 months ago

            Does this mean - in theory - I can put one metal plate out in sun, one in shade, connect with a wire? Or is it a contact surface area thing?

            • ∟⊔⊤∦∣≶@lemmy.nz
              link
              fedilink
              English
              arrow-up
              4
              ·
              edit-2
              9 months ago

              Pretty sure they have to be together like a creme biscuit. You can’t put one plate on the equator and one in Antarctica and generate infinite electricity

            • CookieOfFortune@lemmy.world
              link
              fedilink
              English
              arrow-up
              1
              ·
              9 months ago

              Sure that does work but it’s not efficient.

              Thermal solar generators do exist but they use a liquid as a heat transport mechanism. These use mirrors to focus the sun into a single point. In general you get more efficiency when there’s a larger temperature difference.

              You could also get infinite energy by digging a deep hole since it gets hotter there deeper you dig. It’s just pretty expensive.

            • HappycamperNZ@lemmy.world
              link
              fedilink
              English
              arrow-up
              2
              ·
              9 months ago

              Looks like you are also a kiwi (that or an AI bot cus i see you everywhere) so probably in an electric chilibin- the reverse effect can be used to cool one plate of metal and heat up the other side.

              • ∟⊔⊤∦∣≶@lemmy.nz
                link
                fedilink
                English
                arrow-up
                1
                ·
                9 months ago

                The whole internet is AI bots bro. You’re the only real human here.

                If I was a human though, I would be Kiwi. Kia ora!

                Yeah, I think that’s what I was thinking of.

            • dogslayeggs@lemmy.world
              link
              fedilink
              English
              arrow-up
              1
              ·
              9 months ago

              You are thinking of a thermo-electric cooler (TEC) or peltier cooler. They actually are used on smaller wine fridges but not full sized fridges. They are light-weight, electrically efficient, and reliable. They were also used in the early days of CPU overclocking.

        • belathus@bookwormstory.social
          link
          fedilink
          English
          arrow-up
          7
          ·
          9 months ago

          The device you’re thinking of might be a peltier or thermoelectric cooler (TEC). But yes. They’re way less efficient than a vapor compression refrigerator, though.

        • CookieOfFortune@lemmy.world
          link
          fedilink
          English
          arrow-up
          3
          ·
          9 months ago

          Like the very small fridges that work for a single soda can? Refrigerators use the liquid/gas transition to move heat around. It’s much more efficient.

          The only real advantage of Peltiers are simplicity and size.