• mondo_brondo@lemmy.world
      link
      fedilink
      English
      arrow-up
      48
      ·
      6 months ago

      Surely they meant “garage door spring”, which can be quite dangerous if you don’t know what you’re doing while replacing them.

      • Darkassassin07@lemmy.ca
        link
        fedilink
        English
        arrow-up
        17
        ·
        6 months ago

        Yup. (during install) You often use two short 1/2" steel rods to wind tension into the spring, using one to hold the tension while you move the other to the next position and/or lock down the set screws that keep it in place.

        If you do this incorrectly and slip, that spring will unwind in a hurry and usually throw one of those ~5lb steel rods with enough force to put it through a wall.

        One of those hits you you’re gonna have a bad time.

        • Big_Boss_77@kbin.social
          link
          fedilink
          arrow-up
          11
          ·
          6 months ago

          I can’t even explain it… but this is easily one of the most terrifying things I’ve done. It’s not complicated, just nerve wracking…

        • dual_sport_dork@lemmy.world
          link
          fedilink
          English
          arrow-up
          7
          ·
          6 months ago

          Those are the torsion ones. The tension spring kind will just whip you with a steel cable that’s going fast enough to amputate fingers.

          Always put the spring in its least tensioned position (door up) before fucking with it.

          • Darkassassin07@lemmy.ca
            link
            fedilink
            English
            arrow-up
            4
            ·
            6 months ago

            If you can… Often the door in the up position blocks access to the springs, leaving you no choice but to do it door down. Part of the reason it’s so dangerous. Wouldn’t have to manually build so much tension if you could leave the door up to install them.

        • OhmsLawn@lemmy.world
          link
          fedilink
          English
          arrow-up
          3
          ·
          6 months ago

          Yeah I did that once. Scary as fuck. I definitely kept my body off to the side and made absolutely certain that I had the bars fully seated. Still, probably not going to do it myself next time.

      • ricecake@sh.itjust.works
        link
        fedilink
        English
        arrow-up
        12
        ·
        6 months ago

        Garage doors have one of two types of springs in them, and both of them are capable of killing you if handled incorrectly.
        One can hurl a piece of metal into you at high speeds, and the other can cut you like a steel whip.

        It’s one of those things where you should be firmly in the category of “definitely know what you’re doing” before you consider doing it yourself.

            • Lileath@lemmy.blahaj.zone
              cake
              link
              fedilink
              English
              arrow-up
              1
              ·
              6 months ago

              I’ve only seen the second type in the garages I was in (admittedly not very many), I don’t live in the US though, assuming you do.

              • Darkassassin07@lemmy.ca
                link
                fedilink
                English
                arrow-up
                1
                ·
                6 months ago

                Canada.

                They’re pretty rare in homes and entirely unseen in warehouses.

                Worked for a garage door supplier for a while too: almost all torsion springs. Still a few linear tension springs but really not many.

          • ricecake@sh.itjust.works
            link
            fedilink
            English
            arrow-up
            4
            ·
            6 months ago

            Depends on the type of garage. It’ll either be at the front, above the door and running parallel to the opening, or it’ll be a big ass spring above your head when you’re facing the door.

            In the first case, it’s possible it’ll just look like a black or green cylinder at first glance.

            first type

            second type