Image description:

A memory test screen that claims the test passed with no errors, while somehow the display itself has at least three errors on it.

The issue turned out to be bad capacitors.

    • moody@lemmings.worldEnglish
      5·
      10 months ago

      I’m surprised that it ran through even one full test with no errors. IME when RAM has any issues, you get a flood of errors during testing.

      It can’t even display a screen full of text without 3 errors, how did it get past an entire test without catching any?

      • over_clox@lemmy.worldOPEnglish
        5·
        10 months ago

        A theory I have about why that happened that way and didn’t get detected…

        The bad caps might have been for the GPU slot power, and the glitch might have actually occurred in the GPU VRAM, not the system RAM.

        Sigh, we’ll never know for sure…

      • over_clox@lemmy.worldOPEnglish
        2·
        10 months ago

        I know right? That’s the only time I’ve ever seen such a thing, and I probably would have totally missed it if it wasn’t for the no0errors glitch.

        A few new capacitors fixed it right up.

        Weird huh?

    • over_clox@lemmy.worldOPEnglish
      9·
      10 months ago

      Damn, I think you spotted two more errors that I hadn’t even noticed. I hadn’t noticed Test #0 or DDR669.

      But you did miss one, “Press Ecc to exit” Should be Esc

      I found that one extra funny, along with no0errors 😂🤣

      • hypelightfly@kbin.social
        4·
        10 months ago

        I don’t believe either of those are errors, unless I missed something on the test count. Counting starts at 0 and you already covered the DDR rate.

        Also L3 cache “none” isn’t an error. The CPU has no L3 cache.

        • over_clox@lemmy.worldOPEnglish
          1·
          10 months ago

          Memtest does start at Test #0?

          Okay, it’s been forever since I’ve needed to run Memtest, I kinda forget these days.

          That Ecc is definitely an error though, should be Esc

    • over_clox@lemmy.worldOPEnglish
      1·
      10 months ago

      I did a little number crunching to see about that DDR669 thing…

      If indeed the CPU speed is correct at 3014MHz, then the clock multiplier must be 4.5, yielding a RAM speed of 669.777MHz.

      That part just might check out, but I dunno, I took that photo back in like 2011.